24 hours service hotline

首页 > News > Industry News

The inflatable tent?

times   2015-12-22

The inflatable tent?
Inflatable tent is a tent, adopt the principle of structural mechanics design framework, by making use of the characteristics of gas pressure gasbag swell form has certain rigid cylinder, through the organic combination of propping up tent frame.
Chinese name
The inflatable tent
Foreign names
Inflatable tent
The inflatable tent
Gaseous materials
High strength polyester yarn net cloth
Tarpaulin material
600 d water-proof Oxford cloth
The bottom part
The PVC knife scraping the cloth
Special point
Waterproof moisture-proof uv protection, flame retardant, long service life
Introduction to the

Inflatable tent is a kind of tent with the principle of structural mechanics design framework, using the gas pressure, sex will balloon expansion form has certain rigid cylinder, through the organic combination of propping up tent frame.As skeleton materials strength size, can set up a tent bearing size, USES the high polymer coating performance, determine the service life of the framework and frame rigid, and the rationality of the air chamber is set, then determines the framework of limit.Mainly used in moisture-proof, waterproof, wind, dust, sun protection, disaster relief, short-term training field Short-term operational practice, field.
Fabric quality: Oxford cloth, PVC coated fabric
Inflatable column material: PVC coated polyester grey cloth
To adapt to the temperature: - 40 ° - + 65 °
Framework wind: 6-8
Hydrostatic pressure: hydrostatic pressure p 16 kpa
The surface water: 160-200 - mm
Charging time: 2 to 10 min (along with the tent size change)
The characteristics of

By adopting the combination of adhesive bonding and high frequency thermal bonding process, the air column use PVC coated fabric, tarpaulins are waterproof, anti-uv material, has quick molding, high strength, fire, mouldproof, anti-uv, moisture, etc.Tents for inflatable tent, tent for column frame structure, compared with general metal stent tents, with light weight, small volume after folding convenient, easy to carry, etc.
The erection
Relatively speaking, inflatable tent set up is very convenient, only need to tent flat out on the ground, foot pump and electric pump is connected, only two people, can be set up in a few minutes.
When removed, too, the removal of metal stents and packaging need is more, the number of time are longer.And at the time of the demolition inflatable tent just need to let its natural gas, or electric vacuum blower fan extraction.


So, compared with common metal stent tents, inflatable tent has its incomparable advantage, its light weight, small volume, in transit has the advantages of ordinary metal stent tents have no.Can't is very simple, and its construction and demolition waste more manpower and time, especially suitable for use in emergency rapid response.In harsh environment can't arrive in time, can also be parachuted inflatable tent
Inflatable tent is mainly divided into: frame type inflatable tent, monolithic inflatable tents, military inflatable tent.
Frame type inflatable tent
Frame type inflatable tent in the form of gas column frame, airbag use PVC coated fabric high-frequency heat sealing, electric pump or foot pump inflatable can rapid prototyping.
Monolithic inflatable tent
Monolithic inflatable tent on the side wall and canopy cover for the donor, on both ends of the interlayer on-demand open doors and Windows, forming special tents inflatable heat preservation sound insulation;With large rigidity, stability is strong, sound insulation, heat preservation, forming and fast recovery, etc.
Military inflatable tent
Military inflatable tent

Build a disassembly is simple and quick, you can install or remove in a very short period of time, to save your precious time.Better heat preservation sex and inflatable tent is made of high quality PVC tarpaulin, tear resistance, better tensile strength, better aging resistance, long service life.Under and eight grade wind load safe use, service life is 2 years in a row.
The difference between the inflatable tent and ordinary metal stent tents generally has the following three points:
A, weight,
Metal stents tent because of using the iron pipe as support, so the weight is bigger, it inevitably brings, transport and mobile.Especially the tent area, the use of stents has, the more and the tent area increases, bearing demand is bigger, which creates a support bearing weight increase, the corresponding also use iron pipe wall thickness is greater, the weight of the tent is bigger.
And inflatable tent and inflatable keel, can be folded, and ordinary metal iron pipe bracket structure tents to compare said, weight is lighter, obviously it on transportation is relatively easier.
Second, the volume
The same volume in the tent, metal support structure tents, due to the presence of iron pipe bracket, unable to free packaging;And iron pipe bracket length is longer, usually lead to smaller vehicles will can't let go in, on the transport, so we must adopt the larger vehicles.
The inflatable tent, is due to the software, inflatable keel, and the air column can be folded after deflated;This design makes the tent after using, it can be free fold, only takes up a small volume, can easily into the small household vehicles and ordinary vehicles.Transportation is convenient.
Third, erection and dismantling
Metal stents need many people set up tents, set up a long time, and the tents, the greater the need of personnel, the more are more time consuming.
Has quick molding, high strength, fire, mouldproof, anti-uv, moisture, light weight, small volume after folding, convenient and easy to carry, etc.
Military applications: inflatable tent camping field construction work, training, temporary clubs, sports, entertainment and forces command post, field hospitals, disaster relief, camping and leisure, tourism, etc.
The main function
The characteristic of moisture proof, prevent mosquito heat preservation, infrared resistance, flame retardant, etc.The tent on the design of the pillar shape, adopts the international popular form.Products with high stability, shear distribution characteristics of strong wind, no rain.
Knowledge of assembly
Place choose a flat ground first, and then open the packing, the inflatable tent flat out on the ground, high pressure air compressor with gas, the four stand a person respectively, pull the rope in case of not flat on horizontal stand until hold good. Finally, the anchor to play good, the wind rope tension.

Common problems
Q: inflatable tent flat?
Answer: if you find any leakage phenomenon, can be the first column to wipe clean, then daub table surface with soap and water, to check the leakage point.Leak point if it is a very small hole, you can use a small round repair fabric (any specifications of the inflatable tent in the standard), brushs bit glue, and then stick on the funnelled, after waiting for glue to work, adhesive sealed.If a flat place for gas heat does commissure glue, can divide the following steps:
1, first the bonding surface clean.
2, the figure jovan inflatable tent would give with a bottle of glue, inflatable air column special glue, brush on the pre glue, it must be uniform coating, thickness is appropriate, brush figure after two times, can glue.
3, stick interface must be designed into a circular or oval shape, try to avoid square and sharp Angle interface shape, lap width not less than 30 mm.
4, after waiting for glue volatilization do for bonding, patch must be smooth, no fold, roller pressure, leveling, use hair dryer to supply heat source at the same time, easy to glue.Adhesive can use inflatable after 6 hours.
Pay attention to
1, in the mud or sand when installation, can be dug sewers around the military tents, to ensure that the tent on the surface of the mainland and dry.
2, if you need the tent inside the kitchen, be sure to make the flame away from the tent or use fire prevention board isolation, cooking people cannot leave the tent, make plans to put out a fire at ordinary times, and install the exhaust fan to eliminate lampblack.
3, to predict the local wind more than 8, please remove reception tent.In order to avoid unnecessary losses.
4, has dispatched deposit prior to drying tarpaulins, wait for after its recovery and dry, fold to receive and like too late to tarpaulin dry, remember must not far, so as to avoid coloring and mildew.
5, according to the condition of humidity and local climate, air basks regularly tarpaulins, lest the bacterium, disaster relief tents rain coat would be damaged.

Copyright © 1968-2014 FTF/zhenhan Inflatable CO.,LTD